Downloads
Power Transmission Systems
All downloadable PDF documents currently available on this site are indexed below for ease of access. The product information archive at Optibelt NZ currently holds over 1Gb of PDF documentation. Should you be looking for more specific information than shown below, please contact us at your convenience.
V-Belt Design Hints
A guide to longer V-Belt life. Includes a cause and remedy section for most common damage/failure scenarios.
Timing Belt Design Hints
A guide to timing belt drives. Includes a cause/remedy section similar to the V-Belt design guide.
Roller Chain Design Hints
A guide roller chain drives. Includes sections on alignment, lubrication, tensioning etc.
Drive Design Request Form
Complete the form on-line and submit via email. We’ll design a cost-effective drive to your specifications.
V-Belt Pulley Catalogue
Includes dimensional information on the complete size range of V-Belt Pulleys.
Timing Pulley Catalogue
Includes dimensional information on the complete size range of Timing Pulleys.
Couplings Catalogue
Size and selection information on the Optibelt range of couplings.
Clamping Bushes
Optibelt introduces our new range Clamping Bushes
Lenze – 8200 SMD Drives
0.25kw to 2.2 kW AC inverters.
The SMD range is a cost effective option when basic motor/speed control is required.
SMV Frequency Inverter
The SMV is a cost effective option when higher performance and/or stand alone operation is required.
8200 Vector Inverters
0.25kW to 90kW AC inverters. The 8200 vector frequency inverter combines optimum power with high drive performance in a single universal system. The modular product range can solve your individual drive tasks – at a very reasonable price.
Lenze – 9300 Vector Inverters
0.37kW to 400kW AC inverters. Powerful and multi-functional, 9300 series inverters are the ideal platform for combining dynamic performance with intelligent control.
G-Motion Geared Motors
Information on the range of geared AC motors.
INTORQ Brakes and Clutches
Introduction into the world of INTORQ’s brakes and clutches.
BFK-458 Spring Applied Brake
These electromagnetically released spring applied brakes can be used wherever rapid deceleration or controlled holding of moving masses is required. The INTORQ BFK458 product range replaces the 14.448/14.449 and 14.450 spring-applied brake types.
Electromagnetic Clutch-brake Combinations
Electromagnetic clutch-brake combinations have been enjoying market success for a number of years. As the drive runs continuously with the clutch rotor, the energy from the upstream drive can be used to accelerate the output.
Electromagnetic Clutches and Brakes
INTORQ 14.105 and 14.115A catalogue to help you select the electromagnetic brake and/or electromagnetic clutch to meet your needs.
Ideas In Motion
An overview of the Lenze product range and applications in various industries.